Licensed & Insured, in Tallahassee and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Tallahassee
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (850) 404-0887 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Tallahassee and surrounding areas · On-site visits included · Free estimate within 24h
Tallahassee Metal Roofing is a team of local certified professionals based in Tallahassee. We respond quickly in Tallahassee and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (850) 404-0887⭐⭐⭐⭐⭐ 4.9/5 · 200 verified Google reviews
“Our old wooden barn was falling apart and we needed the roof redone before storm season. The crew came out and put on new corrugated metal panels over the whole thing in about three days. They cleaned up every last screw and scrap of metal off the ground before they left.”
Commercial & Agricultural Metal Roofing
“We added a covered porch to the front of the house and had them do a metal roof over the existing shingles so everything matched. Honestly looks better than the original roof now. Took them two days and the price was fair.”
Metal Roof Over Shingles (Retrofit)
“Had a standing seam roof put on our place out in the country, roughly 2,400 square feet. The crew of four knocked it out in under a week and the dark green finish looks sharp. Only gripe is they left a few metal shavings in the driveway that I had to sweep up myself.”
Standing Seam Metal Roofing
“Tore off the old rusted panels and replaced the whole roof on our house. What sold me was how they walked me through the flashing details around the chimney before starting. No leaks through two big rainstorms since.”
Metal Roof Replacement
“Had a leak right where the vent pipe comes through the metal roof. They got out within a couple days, resealed and replaced the flashing around the pipe, and it's been dry ever since. Relieved is an understatement.”
Metal Roof Leak Repair
“Brand new metal roof on our house and I couldn't be happier with how it turned out. They finished in five days, kept the yard tidy the whole time, and hauled off every bit of the old material. Even the gutters got matched up to the new roof.”
Metal Roof Installation
“We've got big live oaks hanging over the house and the metal roof was constantly getting dinged and leaking at the seams. They came out, replaced a bunch of screws, re-fastened loose panels, and patched a couple of puncture spots. Solid work, though scheduling took a little longer than I expected.”
Metal Roof Repair
“Called them out to inspect the metal roof after a bad wind storm knocked limbs down on it. Turned out it just needed some screws replaced and re-fastening, no real damage. They could've easily upsold me on a full replacement and didn't. Honest folks.”
Metal Roof InspectionReal photos of our work in Tallahassee · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, and screw-down panels on a simple gable roof. |
| Standing seam installation | Starting at $12/sq ft | Concealed clips, 24-gauge panels, and site-bent trim, priced higher for steep pitches. |
| Stone-coated steel or metal shingle | Starting at $14/sq ft | Includes the stone or shingle profile panels and trim for historic district and HOA homes. |
| Complex or large-scale job | On estimate | Dormers, multiple valleys, and rotten decking need an on-site walk before we quote. |
| Travel | Included | In Tallahassee and surrounding Leon County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (850) 404-0887, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, standard gable | Starting at $10/sq ft | Includes tear-off, synthetic underlayment, panels, and standard trim on an accessible single-story roof. |
| Complex roof with valleys and chimneys | On estimate | Cut-up roofs with dormers, multiple chimneys, or steep pitch need an on-site measure before pricing. |
| Historic district or HOA profile | On estimate | Design review and custom panel profile add scope, so we quote after the approval path is clear. |
| Deck repair and sheathing replacement | Priced per sheet | Soft sheathing found at tear-off is quoted per sheet, with photos before we replace anything. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and metal replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment and new metal; moves with pitch and layer count |
| Standing seam replacement | Starting at $12/sq ft | Concealed-fastener panels with new trim; higher on complex roofs with valleys and dormers |
| Exposed fastener replacement | Starting at $9/sq ft | Corrugated or ribbed panels over new underlayment; access and roof size drive the final number |
| Historic or HOA metal shingle replacement | On estimate | Design review, custom profiles and trim need an on-site look before pricing |
| Travel | Included | in Tallahassee and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel retrofit | Starting at $7/sq ft | Includes slip sheet, corrugated or ribbed panels, and standard trim; deck repair moves the price. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed fasteners and raised seams over existing shingles; roof complexity and valleys raise the rate. |
| Stone-coated steel or metal shingle retrofit | Starting at $13/sq ft | Textured or shingle-profile panels for HOA and historic district approval; penetrations add cost. |
| Complex or large-scale retrofit | On estimate | Multi-layer roofs, soft decking, or multiple chimneys need an on-site look before we quote. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, small flashing) | Starting at $450 | Covers backed-out screw replacement, seam resealing, and small flashing fixes on accessible roofs. |
| Panel replacement (single panel) | Starting at $850 | Includes matching panel, new fasteners, and seam re-forming; price rises with pitch and height. |
| Storm or tree impact repair (multiple panels) | On estimate | Multiple panels, ridge caps, and flashing require an on-site look to scope correctly. |
| Travel | Included | In Tallahassee and surrounding Leon County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Diagnostic leak inspection | Starting at $450 | Includes roof and attic inspection, leak source identification, and a written repair recommendation with photos |
| Fastener and flashing repair | Starting at $650 | Covers replacing failed screws and washers or rebuilding a small flashing detail, priced by access difficulty |
| Seam, boot, or skylight repair | Starting at $850 | Includes seam re-securing, pipe boot replacement, or skylight curb repair, with pitch and panel type affecting the rate |
| Storm damage and panel replacement | On estimate | Punctured or lifted panels need an on-site look to match profile, color, and scope before pricing |
| Emergency tarping | Starting at $350 | Priority response after hurricanes or tornadoes to stop active water intrusion until permanent repair |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Washer-only refresh (small roof) | Starting at $750 | Replace hardened washers under sound screws on a single low-slope section, includes walk-through and photo log |
| Partial re-fastening (40 to 150 screws) | Starting at $1,200 | Pull and replace failed fasteners with oversized screws and new washers, price rises with pitch and roof height |
| Full-slope re-screw | Starting at $2,400 | Every fastener on a slope replaced, ridge and trim re-set, includes documented fastener count and water test |
| Decking repair add-on | On estimate | Soft or rotted decking found during probing needs an on-site look before we can quote the panel lift and wood repair |
| Travel | Included | in Tallahassee and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated or 5V panel roof (standard) | Starting at $5.50/sq ft | Includes standard panels, fasteners, closures and basic trim on an accessible roof; gauge and pitch move the price. |
| R-panel roof (ribbed) | Starting at $6.25/sq ft | Includes trapezoidal rib panels and trim; roof complexity and tear-off of existing layers add cost. |
| Re-fastening and screw replacement | Starting at $3.00/sq ft | Includes new screws, washers and closures on a sound panel roof; rusted panels may need replacement. |
| Tear-off and deck repair | On estimate | Existing layers, rotten decking and access around trees or power lines need an on-site look first. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural-profile steel shingle | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, standard flashing and cleanup on an accessible single-story roof. |
| Stone-coated steel shingle | Starting at $11/sq ft | Includes mineral-coated panels for slate or shake look, plus trim; price rises with roof complexity and pitch. |
| Slate or shake profile premium | Starting at $13/sq ft | Heavier stamped panels with deeper shadow lines; higher cost on cut-up hips and valleys common locally. |
| Complex or large-scale job | On estimate | Multi-layer tear-off, rotten decking, steep pitch or tight lot access needs an on-site look before pricing. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard tear-off | Starting at $9/sq ft | Includes tear-off, underlayment, standard flashing, and panels on an accessible single-story roof. |
| Stone-coated steel, complex roof | Starting at $12/sq ft | Steep pitch, multiple valleys and hips, or chimney and skylight flashing drive the price up. |
| Retrofit over one shingle layer | Starting at $7/sq ft | Install over a sound single layer where code allows, saving tear-off and disposal cost. |
| Storm damage repair and panel replacement | On estimate | Scope depends on panel count, matching profile availability, and hidden deck damage found on inspection. |
| Travel | Included | in Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Bay window or dormer copper pan | Starting at $20/sq ft | Includes custom-formed copper pan, soldered seams, and new underlayment at the detail. |
| Porch roof in flat-seam copper | Starting at $22/sq ft | Includes tear-off of old porch roof, deck repair as needed, and hand-soldered copper pans. |
| Zinc or terne-coated metal detail | Starting at $21/sq ft | Includes formed pans and flashings in weathered gray metal, priced by area and detail count. |
| Full architectural copper roof | On estimate | Needs an on-site look at pitch, deck condition, and detail count before a number is given. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on single-story ranch | Starting at $2.50/sq ft | Includes wash, prep, rust treatment, and coating; price rises with rust severity and roof pitch. |
| Two-story home under live oak canopy | Starting at $3.25/sq ft | Includes lift or rigging access and heavy tannin cleaning; canopy and height drive the higher rate. |
| Barn or agricultural building recoat | Starting at $2.75/sq ft | Includes fastener gasket replacement and rust conversion; large square footage and access roads affect pricing. |
| Historic district color-matched repaint | On estimate | Requires on-site color review and HOA or historic board approval before a number is final. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing rebuild | Starting at $600 | Covers new apron and counter-flashing on one accessible chimney, with masonry tie-in and sealant. |
| Skylight curb flashing repair | Starting at $750 | Rebuilds curb flashing and adds a cricket if needed; price rises with roof pitch and access difficulty. |
| Valley or wall transition flashing | Starting at $850 | Replaces valley metal or step flashing at dormers and walls; hidden rot or decking damage adds cost. |
| Multiple penetrations or complex roof | On estimate | Chimney plus skylights plus dormers needs an on-site look to scope labor, access and materials. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Entry or walkway guard zone | Starting at $1,200 | Includes clamp hardware, layout, and installation over one drop zone; roof height and pitch move the price. |
| Multiple drop zones | Starting at $1,800 | Covers two to three zones; linear footage, panel profile, and staging access drive the final number. |
| Guard rails and bars | On estimate | Continuous rail systems need an on-site look at span, panel type, and load before quoting. |
| Tree limb clearance before install | On estimate | Overhanging oak limbs often need clearing for safe staging; scope depends on canopy density. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and a written repair versus replacement assessment. |
| Screw replacement and re-fastening | Starting at $350 | Includes pulling backed-out screws and replacing washers on exposed-fastener panels. |
| Single panel replacement | Starting at $650 | Covers one standing seam or ribbed panel swap with new clips and fasteners. |
| Flashing and trim repair | Starting at $450 | Rebuilds ridge caps, gable trim, or chimney flashing damaged by wind lift. |
| Full storm damage re-roof | On estimate | Needs an on-site look at panel count, access, and whether the deck is sound. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard on-roof inspection | Free estimate | Full walk with fastener, seam and flashing check, plus written findings on most single-family homes |
| Pre-listing or buyer inspection | Starting at $250 | Photo-documented condition report with remaining service life estimate for real estate transactions |
| Post-storm damage inspection | Starting at $300 | Impact, lift and debris assessment with photo documentation suitable for insurance claim files |
| Attic and wind-mitigation inspection | Starting at $200 | Roof-to-wall connection and wind-mitigation detail review, priced by attic access and roof complexity |
| Travel | Included | in Tallahassee and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, 6-inch | Starting at $9/linear ft | Includes on-site forming, hidden hangers, and standard downspouts; run length and downspout count move the rate. |
| Seamless steel or half-round gutter | Starting at $14/linear ft | Heavier material and deeper profile; historic district profile requirements and fascia condition affect the final figure. |
| Gutter guard installation | Starting at $6/linear ft | Micro-mesh or reverse-curve guards; heavy oak and pine canopy on your lot drives the guard spec and price. |
| Fascia repair and re-hang | On estimate | Rotted fascia, loose hangers, or storm damage need an on-site look before we quote the repair scope. |
| Travel | Included | In Tallahassee and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (850) 404-0887, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair and re-fastening | Free estimate | Covers screw replacement, resealing penetrations, and flashing repair; price moves with roof size and leak count |
| Exposed-fastener panel roof | Starting at $4.50 per sq ft | Includes panels, underlayment, and fasteners; access and deck condition move the final figure |
| Standing seam panel roof | Starting at $9.00 per sq ft | Concealed fasteners and raised seams; building height and roofline complexity raise the number |
| Retrofit over existing roof | On estimate | Needs an on-site look to confirm the existing deck and code limits on layers |
| Travel | Included | in Tallahassee and surrounding Leon County areas, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (850) 404-0887, with no obligation to book the work |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Tallahassee need a crew that understands the particular demands of this region: steep pitches, dense tree cover, and the kind of wind and rain that only the Red Hills can deliver. Tallahassee Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair, whether you are protecting a historic home under the live oaks or a newer build in Bradfordville. We work on mountain homes with high-elevation exposure and the large stock of aging screw-down roofs that are common in this area.
Our network of licensed, insured local contractors serves Tallahassee, Woodville, Bradfordville, Chaires, Fort Braden, and the surrounding communities. We know how fallen limbs, hurricane winds, and heavy downpours test a roof, and we match the system to your home rather than pushing a one-size-fits-all package. When you are ready for straight answers and a roof that is built for this climate, call (850) 404-0887 or request a free estimate.
On a 15 to 30 year old exposed-fastener roof, the number one cause of leaks is not the panel itself but the fasteners. The EPDM sealing washers under each screw dry out, shrink, and crack, allowing water to slip past the head and into the attic. Seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels, and punctures from fallen limbs all create the same result: water tracking along purlins and decking, sometimes far from the original entry point. Left alone, that moisture rots sheathing and ruins insulation, turning a small repair into a major restoration.
The honest call between repair and replacement depends on the age and condition of the panels, the extent of the damage, and whether the underlayment or decking has been compromised. Often, a full screw replacement with new fasteners and sealing washers restores a watertight roof for a fraction of the cost of a new one. When the metal is still sound but the details are failing, targeted repairs make sense. When corrosion, widespread seam failure, or rotted decking is present, replacement is the better investment.
We diagnose the actual source rather than guessing, and we explain your options plainly. If you have an active leak, a wind-lifted panel, or a roof that has been patched one too many times, call (850) 404-0887. You can also learn more about our metal roof repair services or schedule a free inspection to get a clear picture of what is happening up there.
We install the full range of metal roofing systems, and we match the system to the home rather than the other way around. Standing seam is the premium choice: concealed clips, no exposed fasteners, and clean lines that suit everything from historic Victorians to modern builds. Exposed-fastener corrugated and ribbed panels are the economical workhorse for cabins, barns, workshops, and agricultural buildings. Metal shingles and stone-coated steel offer the look of traditional roofing with the durability of steel, while copper and specialty metals provide accents and full roofs for distinctive architecture.
The honest comparison is simple: standing seam costs more upfront and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over the life of the roof. We also offer metal roof over shingles (retrofit) when the deck is sound, and tear-off when it is not. For a closer look at the options, see our pages on standing seam metal roofing and corrugated and ribbed panel roofing.
Metal roof installations are typically quoted per square foot, while repairs are often flat-rate, and the final number depends on several factors: the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. We do not publish fixed prices because every roof is different, but we can tell you that final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, so it is worth asking your insurer, though we make no promises about what your policy will do.
For a clearer picture of typical ranges, visit our pricing page, and then call (850) 404-0887 to request a free estimate or a free roof inspection. We will give you a straight answer on what your project is likely to cost and whether a repair, a coating, or a full replacement is the right call.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find and leave the coverage question to the professionals who handle it.
On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements are set locally. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, always verify with the Tallahassee building or planning department before starting your project. For help understanding the process or to schedule an inspection, contact us.
Ready to get started? Tallahassee Metal Roofing serves in Tallahassee and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Tallahassee · Response within 24h · No commitment · ☎ (850) 404-0887
Your Free Quote Request